|
DIN8035 SDS-plus shank electric hammer drill bits-four cutters (Click here to view PDF catalogue) |
| Manufacturing process: milled |
|
| Point angle: 130º Flute: double flutes | |
| Material: 40Cr, tungsten carbide | |
| Finish: Sandblasted, Zine-coated, Ni-coated | |
| Diameter: 4-30mm |
| D | Overall length | ||||
| 110 | 160 | 210 | 310 | 460 | |
| 6 | 110 | 160 | |||
| 8 | 110 | 160 | |||
| 10 | 160 | 210 | 310 | ||
| 12 | 160 | 210 | 310 | 450 | |
| 14 | 160 | 210 | 310 | 450 | |
| 16 | 160 | 210 | 310 | 450 | |
| 18 | 210 | 310 | 450 | ||
| 20 | 310 | 450 | |||
| 22 | 310 | 450 | |||
| 24 | 310 | 450 | |||
| 25 | 310 | 450 | |||